Uses for Weather-Bos™ (i.e. roofs, sidings, fences)
Industries using
Weather-Bos™ (i.e. architects, contractors, wood product
manufacturers)
The advantages of Pre-
Staining your wood
How Much Weather-Bos™
do I Need?
Why does wood turn grey
and dull?
The science behind the
stains which occur on wood.
How to Become a
Weather-Bos™ Distributor/Manufacturer
 |
|||
 |
|||
|
|||
|
Free Orderline 1-800-664-3978
|
|||
Coverage greatly varies depending on the surface porosity. Average coverage ranges from 50 to 250 square feet.
We recommend a minimum of three
applications,
with formula clear (F1-C) as the final coat.
Please purchase adequate quantity
of product for your project.
Note: Coverage is dependent on proper preparation and application procedures. Click on the specific formulas for application directions.
The Boss
Average coverage is 50-150 sq ft (4.7-13.95 sq ms) per U.S. gal. per
application depending upon type of surface and climatic conditions. On
most surfaces, to obtain maximum protection we recommend a minimum of
three applications.
Deck Boss
Average coverage is 50-150 sq ft (4.7-13.95 sq ms) per U.S. gal. per
application depending upon type of surface and climatic conditions. To
obtain maximum protection we recommend a minimum of three applications on
most decks.
Roof Boss
Average coverage is 50-100 sq. ft. per gal. (4.7-9.3 sq ms) per
application depending on age, preparation procedures and climatic
conditions.
The optimum of protection for all new cedar shake & shingle roofing is to apply Weather-Bos™ to all sides by pre-dipping prior to installation. This method of application will provide maximum protection and dimensional stabilization.
For maximum long term protection we recommend two applications.
Average Coverage is 100 to 200 sq. ft (9.3-18.6 sq ms) per U.S.
gallon per application, depending on age and preparation procedure. For
maximum long term protection we recommend three applications.
Average coverage is 100-250 sq. ft. per gal. (9.3-23.25 sq ms) per
application depending on age, and condition of roof.
For maximum long term protection we recommend two applications.
Masonry Boss
Only one coat is required, with average coverage ranging from 50 to
200 square feet per gallon (4.7-18.6 sq ms) depending on the porosity of
the surface. Following proper preparation and application procedures will
assure maximum protection.
Log Boss
Average coverage is
50-150 sq. ft. per gal. (4.7-13.95 sq ms) per application depending on
condition of surface and types of logs.
The optimum of protection for all logs is to apply Weather-Bos™ to all sides by pre-dipping prior to assembly. This method of application will provide maximum protection and dimensional stabilization.
For maximum long term protection we recommend two applications.
Marine Boss
Only one coat is required, with average coverage ranging from 50 to
200 square feet per gallon (4.7-18.6 sq ms) per application. Hardwoods
such as teak adn mahogany will use less per aplication and require
multiple applications to obtain level of protection or color desired. We
recommend a minimum of three applications.
Average coverage is 100-300 sq. ft. per gal. (9.4-33.9 sq ms) per
application. Proper preparation is vital due to the varying porosity of
fiberglass structures. Apply multiple light coats until desired finish is
aquired.
Average coverage is 150-400 sq. ft. per gal. (13.93-37.2 sq ms) per
application. Apply multiple light applications until desired finish is
aquired.
Our formulas are designed to
penetrate the substrate, providing protection from the inside out.
Please purchase the adequate quantity to give your investments the
best protection possible!
Back to the Weather Bos™ purchasing form
 |
 |
|
||||||||||||||||||||||||||||||||||||||||||
